Commercial LED Lighting Installation at HW Specialist Joinery

Flixborough Eco Technologies completed a LED Lighting installation at HW Specialist Joinery in Holmfirth. The units provided in this project were the Luceco 150W Luxbay.
The existing light levels were between 60 and 100lux which for a precision joinery shop was far too low. After discussions with the client and guidance from ourselves, they opted for a 500lux system which would provide enough light for accurate measuring and cutting.

The factory has frequent changes in output. Different areas of the factory are used at different times; we therefore installed individual PIRs on each unit which will predictably reduce the consumption by a further 50%.

The lamp change and sensor savings from this system are £5,123 with a return on investment of 4.59 years. This sounds high for a lighting scheme however we have increased the lighting levels by an average of 400lux over the full floor area.

Highlights

Scheme Value: £23,650
Savings PA:£5,145
ROI 4.59yrs
Carbon Trust Funding: £3,548
Annual Investment Allowance Saving: £4,731
Theoretical Cost: £15,375.75
Theoretical ROI: 2.98yrs

Download as PDF

Locate Us

Scunthorpe Office

Normanby Gateway, Lysaghts Way,
Scunthorpe, North Lincolnshire,
DN15 9YG
scunthorpe@flixecotech.co.uk
01724 230 240

Lincoln Office

Resolution House, Crusader Road,
Lincoln, Lincolnshire,
LN6 7AS
lincoln@flixecotech.co.uk
01522 244 554

The Flixborough Eco Technologies Team